Phantompatch-TM5402HDCI_ALL
--------------------------------------------------------------------------------

epg has changed
when in epg press info and the more day guide will come up
now when you exit and goto other channel and go into epg the more day guide is still there
press info again and it's back to normal

for who can use the 7 day epg on astra 28.2 east channels like the 6000+7000 super series +5402

scan transponder 11.778 V 27.500

any tv channel on this transponder will load the 7day-epg on your stb ,
go into epg mode on one of those channels and within a minute the epg will populate on almost all channels.
(leave for a few minutes to get full list)
make sure you stay in epg mode and you can press info to see progress

use TMsoftcam for ucas channels on TM-5402HD, use k**s from TechnomateMaker

previous instructions

Fixed.
1-new c/s
2-new default channel list
3-Timer Recording event and stand by fixed
4-NTSC ok now when radio and internet radio selected
5-now and next fixed
6-Blind scan fixed
7-Default audio high


previous patch instructions

1-7days EPG (28e UK)
a- turn on a stb
b- move to 11778 V 27500 on Astra2
c- wait for a minute
d- move to other channels
=========================
2-DD+ no sound
3-Can***** updating
4-TNTsat updating
5-BisTV updating
6-Neotion cam updating

enter pin 0000 or from normal viewing TV screen enter 8281 to access ser*** list

this box uses the same setup details and channel lists as the tm6900 HD box and also the blade BM7000S HD box too

================================= =========================

tm5402 guides etc

use 8281 to access the hidden menu

this is a guide some kind soul posted on another forum, thank you

you will have to obtain your own server for this , do not ask for one on this forum !! its against the rules to ask

open the cfg file with notepad and you will see a c-line in it ( hostname - port , userID - password
you enter the c-line into your tm like
example c-line C: www.c-line.no-ip 22000 FOX1234 test2 no

break the c-line up in 4 pieces at the spaces between the words and numbers
do not put this in the tm because it will not get connected
always miss this > C: > no
example, they like(goto your server menu press 8281 while watching a channel)

Protocol CCCAM

Timeout: 3Sec

3) ID: FOX1234

4) Password: test2

1) Address: _www.c-line.no-ip

2) PORT: 22000

if it's a n-line you will have to use newcamd as your protocol

if you don't have the server menu in your tm you have to install latest patch and latest add on

-----------------------------------------------------------------------------

24/7 epg help

here are the instructions exactly as from a Phantom patch update:

1-7days EPG (28e UK)
a- turn on a stb
b- move to 11778 on Astra2
c- wait for a minute
d- move to other channels

And here's just a bit more information from another site which is in relation to an official Sly receiver but should help you out with doing a manual scan:
When a Sly digital receiver is first switched on it will look for the "Default Transponder".
This is transponder 4, frequency 11.778 Vertical polarisation, Symbol Rate 27.5. FEC 2/3.
This is where Sly's Electronic Programme Guide or EPG is situated.