No, THE One Micha uploaded, this i have tried.
But before i tried to flach, it behaved THE same, 4 White circle lighting Up, nothing more.
No, THE One Micha uploaded, this i have tried.
But before i tried to flach, it behaved THE same, 4 White circle lighting Up, nothing more.
Try disconnecting anything you have attached, including the satellite co-ax cable, just have your HDMI cable, and USB device, connected, then follow Lee's guide:
https://www.satpimps.co.uk/showthrea...ng-up-Vu-Uno4K
If you still get nothing all I can suggest is that you try a different brand/size USB stick.
Can you try it on a different television?
as it shows you d/l both files
which one did you realy try
I have tried a different tv, its THE same.
I bought A USB stick from goldwafers along with the box, this Should work i guess.
I have mail goldwafers.....So leta see what happends. It seems broke to me.
so you didn't d/l this file
https://www.satpimps.co.uk/showthrea...3-0-3-E-Vu-Uno
and only d/l this file
https://www.satpimps.co.uk/showthrea...lackhole-3-03G
yes / no
Try connecting the receiver to your router, using an ethernet cable, then download the Dreambox Control Centre:
https://www.satpimps.co.uk/showthrea...f-DCC-E2-v1-50
Start up the DCC_E2.exe file, on your PC.
Once it opens press the Suchen icon, under Dreambox, then Suche, and see if it racognizes your VU+ Uno 4K, and supplies an IP address.
Also check some of the videos, on youtube:
DCL,
When I bought the box I perhaps downloaded the file or UnO. But that was before I got the box and Micha uploaded the correct file for Uno4k. So the file for uno i deleted.
"BlackHole-3.0.3-vuuno4k_usb_release_20170220_5d48 f4d" IS the one I have tried!!!!
I have also tried "openatv-5.3-vuuno4k-20170303_usb", same result.
I will try Mickha suggestion with Dreambox Control Centre now
thanks
Mickha:
Thanks for your suggestion.
No DCC doesnt seem to find anything, just the router, my spiderbox and my computer. No Uno4k. (have tried it with my spiderbox disconneted also)
And also when I log in to my router to see what's connected it isnt there.
Is it strange that is doesnt make a sound when I turn it on? Should there be a fan or anything?
Can it be so that it has been started up and is set at 2160p, that why I cant see anything.
But of course then, with all your explantion and help, it would still startup and install a image when started up with a usb stick with correctly install image.
Dont know what else I can do............................... ..
/Fredrik
Well, one more thing
When the reciver is on, the remote controll works. When I press a buttom, any buttom, the 4 white circle turn on/off.
So it cant be all dead.
/Fredrik
Have you got access to any other television, with a HDMI port, just to test it on?
The receiver doesn't need to be connected to a satellite dish, to install, and set up, your receiver.
Yes, i have tried two different tv, both with full HP 1080p
Also tried now, formating with a program instead och Windows, didnt help.
I think it might need to be returned, and be tested, to locate the problem.
Posting Permissions
Reply With Quote
Bookmarks