problem with vu + zero

[olindo]

I have problem with vu + zero.
Initially there was a problem with the ethernet connection.
I installed a wireless wi-fi usb and so through this I connected to the internet.
To fix the problem of not connecting to ethernet I tried to pass another image,
but trying two usb did not boot via usb to perform the installation
I know all the procedures for making a flash because I have gone through different images many times.
I also tried to flash the cfe 1.04 file used to fix the ethernet problem but without success
How can I fix this problem that I can not throw image via usb (as the only way).??

[hda5]

Make sure you don't have any other USB devices connected to the box, when trying to flash the new image.
So disconnect the WiFi USB before flashing.

Make sure the USB that holds the image, you're trying to flash, has been formatted to FAT32.

[olindo]

In the receiver there is no other usb as well as the usb that puts the image I have formatted in FAT 32

[JOE.MADDISON]

USE AN OLD small capacity usb stick,check the download is the correct one for your box and/or try different image,or install an old image that worked

[Detlef]

For Vu devices, you probably know that the image must be in a folder on the root of USB stick and the folder name must exactly match the name of the box.

[olindo]

i did all of what you write above

[olindo]

now i have managed to change some images successfully but the problem with ethernet continues to be.

I tried to install the bootloader upgrade from this:
https://www.vuplus-community.net/bo....02-2015.21415/

but I do not know if it was realized but I did not have a result even after that..!!

[oldfart]

does it work wired (direct to router)?

[olindo]

only with wifi stick
with ethernet cable direct in router, no

[JOE.MADDISON]

unplug wifi stick conect receiver to router with cat cable,on receiver go to menu and use network wizard to connect..

[olindo]

nothing

[JOE.MADDISON]

Remove all connections including hdmi lead connect box to tv with av connections restart box see if basic functions /wizard works